How to Configure Dell Mobile Connect for Android (2023)

Table of Contents:

1. DMC Overview
2. DMC connectivity architecture
   • Bluetooth (BT) link
   • WiFi Direct™ link (used for screen mirroring only)
3. Main DMC functions
   • Add New Phone (ANP)
     • PC side wizard
     • Android ANP side
   • Launching and quitting DMC Windows app
     • DMC auto-run
     • Quitting DMC
     • Launching DMC
   • Texting with DMC
     • Receiving text messages
     • Sending text messages
   • Hands-Free calling
   • Screen Mirroring
   • Notifications
4. DMC states
   • Paired state
   • Connected state
   • Disconnected state
5. DMC Windows App
   • DMC Windows app tabs
     • Notifications
     • Dialer
     • Contacts
     • Messages
     • Mirroring
     • WeChat
   • DMC Windows app functions
6. DMC Troubleshooting
   • First-time setup
   • Hands-Free calling
   • Notifications
   • Screen mirroring
7. DMC Frequently Asked Questions

DMC Overview

DMC provides the following key features:

• Sending and receiving text messages
• Receiving and making phone calls
• Receiving and responding to Android notifications
• Running Android apps on the PC screen (using screen mirroring)

Back to Top

DMC connectivity architecture

DMC consists of three software packages:

1. Windows drivers which should be pre-installed on the PC and will be updated automatically through Dell Update (and can be downloaded from there as well)
2. Windows app which should be pre-installed on the PC and can be updated via the MS app store
3. Android app which should be downloaded from the Android market or other Android app stores

Connectivity between the PC and the Android phone is achieved through the following two wireless links (see Fig. 1):

Fig. 1: Phone and PC Connectivity

Bluetooth (BT) link

After completing the Add a New Phone setup (see next section), the phone will be BT-paired with the PC.

The BT link enables the following functions:

• Contacts: The phone book is retrieved from your phone and displayed on the PC.
• SMS: Text messages are received and sent via the BT link.
• Hands-free calling: Phone calls are routed to the PC via the BT link.
• Mirroring input channel:: The phone is mirrored onto the PC screen, and DMC enables interaction with the phone using the keyboard, mouse and touch. These input commands are transmitted through the BT link.
• Communication channel: DMC enables a secure and private two-way communication between the phone and the PC. This channel is used to share device status and transmit information such as Android notifications from the phone to the PC.

Fig. 2: DMC BT functions

WiFi Direct™ link (used for screen mirroring only)

To project the phone on the PC screen, DMC uses a point-to-point link between the phone and the PC, utilizing WiFi Direct™ technology. WiFi Direct™ opens a virtual access point on the PC, referred to as the Autonomous Group Owner (AGO), which functions as a virtual router. The phone establishes a new point-to-point (P2P) connection with the AGO.
It is possible to view the status of the AGO by opening Network and Sharing Center on the PC side.
The AGO name starts with the word "DIRECT" followed by the PC name (see Fig. 3)

Fig. 4: The 3 WiFi links while mirroring is active

NOTE: The virtual router on the PC (AGO) is launched upon the first activation of mirroring. It remains active throughout the session, unless the user chooses to disconnect, or restart DMC.

Back to Top

Main DMC functions

Add New Phone (ANP)

The Add New Phone (ANP) wizard enables easy BT pairing between the phone and the PC, without requiring the user to open the BT setting screens either on the phone or on the PC. In addition, this sets up several communication channels and functionalities for future DMC usage.
Pairing is achieved through the ANP pairing wizard - a simple process in which the DMC Windows wizard requests the user to enter a 6-character code. This code is provided by the DMC Android app. Before generating this code, the Android app displays several system dialogues, intended to verify the user’s approval for sharing data and functionality between the PC and the Phone.

PC side ANP wizard

The PC side ANP wizard is shown automatically upon first launch of the DMC Windows app. When connecting a second phone to the DMC Windows app, the user can relaunch the ANP wizard from Settings > Phones.
In the main screen of the PC wizard (after selecting Android), the user is requested to enter a 6-charachter code, which is generated by the Android app.

To launch the wizard:

1. Click Let’s Start to start the PC wizard

   

2. Select Android, then click Next

   

3. Enter the 6-character code provided by your Android app, and click Next

   

   (Video) How to Install and Setup Dell Mobile Connect on Dell Supported PC and Android Phone

4. Verify that the PIN number code is the same as the one displayed on the phone BT dialogue, and then select Yes

   

5. Click Finish

   

6. ANP PC side is complete. The phone will now be connected to the PC, and DMC is ready.

Android ANP side

The Android ANP wizard is displayed automatically when the Android DMC app is first launched. It consists of the following steps:

• 1. Once the Android DMC app is launched, the Welcome screen is displayed. To launch the wizard, click Pair with a PC

     

  2. Next, a BT permission request is displayed. By clicking Yes the Android phone becomes BT-discoverable by the PC. Clicking No will stop the process.

     

  • Allow DMC to send and recieve SMS messages.
  1. Click Allow to display the next screen. Clicking Deny will block SMS functionality

     

  2. The next screen displays the notification permission dialog. Authorize DMC to transfer of phone notifications to the PC

     

  3. After approving access to notifications, the 6-character authorization code will be displayed. Type this code in the designated field of the PC app (See Step 3 in the PC side ANP wizard section above)

     

     See Also

     How to use Dell Mobile Connect app to make calls from Windows 10 PCคุณสามารถเรียกใช้ Dell Mobile Connect บนพีซี Windows 10 ใดก็ได้Dell ปรับปรุงแอพ Mobile Connect เพื่อใช้งานกับ Your Phone ของ Microsoftวิธีเชื่อมต่ออินเทอร์เน็ตจากมือถือไปยังแล็ปท็อป

  4. The BT pairing request is synchronized with a similar request on the PC side. To ensure a secure connection, verify that both the PC and the phone display the same pairing code. Clicking OK will take us to the next step. Clicking Cancel will break the pairing process (see ANP Troubleshooting).

     

  5. The final ANP wizard screen displays the PC name. Clicking OK completes the wizard and starts DMC

     

• NOTE:

  • The ANP process is required only once for every PC and phone. When the ANP process is completed, DMC will connect the phone and the PC automatically, as long as they are in BT range
  • In the event that a phone and a PC were previously paired, the ANP wizard will still need to be run, but will require less steps

  Launching and quitting DMC Windows app

  NOTE: Closing the DMC app window (by clicking the "x" button) does not quit the DMC app. The app continues to run in the background. The app can only be quit via the information center (see below)

  • After completing the wizard, the user is prompted to authorize the transfer of the phonebook and call logs to the PC. Clicking Allow will provide access to contacts and phone logs. Clicking Do Not Allow will block phonebook and call log features in DMC.

    

    • DMC auto-run

      The DMC Windows app is configured to launch automatically upon PC startup. If the phone is paired to the PC and within BT range DMC will connect the two, unless the user has manually disconnected the two. There is no need to run the Android app or the Windows app to get the system to work.

      It is possible to prevent DMC from auto-running upon PC startup via Settings > Startup in the Windows app

  • Quitting DMC

    To quit DMC the user should go to the Information center, right-click on the DMC icon, and select Quit (see Fig. 5)

    Fig. 5: Quitting DMC from the Information center

    (Video) DELL Mobile Connect - A wonderful piece of software being sent to the grave

    

  • Launching DMC

    DMC can be launched in one of two ways:
    
    1. Via the Windows start menu
    2. By clicking the desktop icon (if exists)

  Texting with DMC

  With DMC, users can view incoming text messages on their PC screen, and use their PC keyboard to easily type text messages.

  • Receiving text messages

    • DMC shows incoming text messages in two scenarios:
      • As a Popup notification
      • On the DMC App when clicking on the Messages tab.

  • Sending text messages

    • Users can type using the PC keyboard and send text messages in the following 3 scenarios:
    • Responding to an incoming text notification
    • Texting while rejecting a call, or a when call waiting is activated
    • By proactively selecting Texting in the Contacts tab.

  Hands-Free calling

  The Hands-Free feature enables users to make and receive phone calls from their PC. The call is routed from the phone in the same way as with BT headsets. Calls are made using the PC’s microphone and speakers, while the phone can be placed at some distance from the PC, but within BT range.

  • Hand-free calling includes the following features:
    • Dialer
    • Making calls via the contacts list
    • Answering calls from an on-screen notification (users can take the call, reject it or reject with a text)
    • Switching between Hands-Free and regular (private) mode (See Fig. 6)

      Fig. 6: The in-call screen

      

  Screen Mirroring

  DMC enables users to project their Android screen on their PC screen, and to fully control the phone via the PC’s touch screen, mouse and keyboard.

  Screen Mirroring can be enabled by clicking on an android notification, or by selecting the Mirroring tab on the DMC Windows App. (Clicking the Wechat button on the left app pane, will mirror the Wechat app.)

  Upon the first-time mirroring is activated, a permission request to capture the phone screens will appear on the Android screen (see Fig. 7.) The user should click Don’t Show Me Again, and then Start now. Clicking Cancel will prevent mirroring, and display a black screen on the PC app.

  Fig. 7: Screen capture authorization dialog

  

  NOTE: The current version of DMC does not play the phone audio via the PC speakers [only phone calls audio is routed through the PC]

  Notifications

  • DMC can pull notifications which appear on the Android phone, such as social media, traffic or weather updates - to the PC screen in one of the following two ways:
    • Notifications are displayed as a pop-up message in the upper right corner of the screen
    • Notifications are also presented in the Notifications tab
  • Key features:
    • Clicking on a notification activates a mirrored phone screen with the associated app.
    • The user can modify the size of the pop-up notifications via Settings.
    • Privacy levels of the notifications are controlled via Settings (private mode requires mouse hovering to reveal potentially personal information).

  Back to Top

  DMC states

  The main states of DMC are: Paired, Connected, and Disconnected.

  Connected state

  • DMC is in Connected state when the BT link between the PC and the phone is active. In order to be in Connected state, all the following conditions must be met:
    • The phone and the PC are BT-paired
    • The phone and the PC are within BT range
    • The DMC app is running

  Disconnected state

  • DMC can be disconnected in the following ways:
    • From the Android app or Android notification (See Fig. 8, 9)
    • From the PC App pane by clicking Disconnect (See Fig. 10)
    • By right-clicking the DMC icon on the Information Center, and selecting Disconnect (See Fig 11)
    • From Settings > phones (See Fig. 12)
  Fig. 8: Disconnection via Android notification

  

  Fig. 9: Disconnection via the Android app

  

  (Video) How to Download & Install Dell Mobile Connect on Mobile & Laptop For Wireless Connectivity

  Fig. 10: Disconnecting via the PC app pane

  

  Fig. 11: Disconnection via the Information Center

  

  Fig. 12: Disconnecting via Settings

  
  

  NOTE: After the phone and PC have been disconnected by the user, they will not be reconnected automatically again. To reconnect, users must go to Setting > Phones in the Windows app.

  Back to Top

  DMC Windows App

  The DMC Windows app provides the following functionality using several tabs located along the left panel of the screen:

  • DMC Windows app tabs

    Tab Icon	Function	Action Prompt
    	Notifications	Opens a screen with a list of the pending phone notifications. The dynamic numbering represent the number of notifications that are waiting to be read.
    	Dialer	Opens a dialer screen that allows insertion of a phone number to be dialed, either through the numbered buttons on the screen (using touch or mouse) or through the PC’s keyboard.
    	Contacts	Opens the phone’s contacts list and allows a contact search. Once a contact is found, the relevant details are presented (including photo when available) and the user is given the option to call or send an SMS message to that contact.
    	Messages	Opens the SMS messaging screen and presents the logged text conversations. A click on certain conversation opens that conversation and makes it ready for new text entry.
    	Mirroring	Mirrors the Android phone’s current screen onto the PC’s screen. Everything on the screen is available for interaction through mouse or touch.
    	Wechat	Opens mirroring session directly on the WeChat app and makes it available for a chat.

  • Notifications

    

  • Dialer

    

  • Contacts

    

  • Messages

    

  • Mirroring

    

  • WeChat

    
  • DMC Windows app functions

  Tab Icon	Function	Action Prompt
  	Settings	Opens the settings screen in a separate window to allow the user modify different app settings and behaviors
  	Disconnect	Disconnects the phone from the PC and terminate the current session. The devices will still be paired and can be connected again with another click on the same icon.
  	Do not disturb	Blocks popup phone notifications from being presented on the PC screen.

  Back to Top

  DMC Troubleshooting

  • First-time setup

  Problem:Cannot pair the phone to the PC
  Probable cause: Failure of BT pairing
  Suggested fix:
  1. Make sure BT is turned on both on the PC and the phone [if either wasn’t on – try pairing again after turning BT on]
  2. [If didn’t help] Go to BT settings on the PC (search for Bluetooth setting), then locate the phone on the paired devices list.
  3. Click the phone name.
  4. Select Remove Device to unpair it
  5. Go to BT settings on the phone, and locate the PC name in the paired or connected list.
  6. Click the PC name and select Unpair.
  7. Restart APN by restarting the Android app.
  8. Select Pair with a PC.
  9. Select Add New Phone from the Windows app Settings > Phones

  • Hands-Free calling

  Problem: Poor audio quality
  Probable cause: Poor BT connection
  Suggested fix: Bring the phone closer to the PC. If this does not work, restart the Windows app.

  Problem: When using BT headset, no call audio is routed to the PC or the headset
  Probable cause: BT cannot support concurrent connections
  Suggested fix: If the headset includes a connecting USB dongle – connect the dongle to the PC and enjoy the ability to use the BT headset with DMC. If no USB dongle is included there is no current support for the BT headset that is connected directly to the PC through the BT settings (BT limitation).

  Problem: Contact list on the PC app "contacts" tab is not visible
  Probable cause: Shared contact permissions weren't granted (during ANP)
  Suggested fix:

  1. Go to Android settings (makes sure that the phone and the PC are connected)
  2. Select BT
  3. Click the icon to the right of your PC name
  4. Turn on "contacts"

  • Notifications

  Problem: Cannot see notifications
  Probable cause: Notifications were not granted permissions
  Suggested fix:
  1. Go to Settings on your Android phone.
  2. Make sure that the DMC app is approved to export messages.

  • Screen mirroring

  Problem: Mirroring quality is poor
  Probable cause: WiFi (direct) connection
  Suggested fix: Bring the phone closer to the PC. If this does not work, restart the Windows app

  Problem: Mirroring quality is poor
  Probable cause: WiFi channels mismatch, mirroring quality may be impacted
  Suggested fix: Restart the Windows app to reset the WiFi channel selection

  Problem: Mirroring does not show on the PC
  Probable cause: The screen capture permissions were not granted for the android notification
  Suggested fix:

  1. Try to launch mirroring again
  2. Wait for the notification and approve it
  3. If that does not work, verify that neither your Antivirus nor yourFirewall settings are blocking DMC
  Problem: Cannot control the phone using the PC keyboard, mouse or touch screen
  Probable cause: Poor BT connection quality or failure to establish input BT profile (HID)
  Suggested fix: Bring the phone closer to the PC. If this does not work, restart the Windows app

  Problem:Cannot type in another language with the keyboard while mirroring
  Probable cause: Android Settings must be properly configured
  Suggested fix:

  1. Go to Android settings
  2. Select Language and input
  3. Select physical KB while mirroring (verify that your computer name appears as the physical keyboard)
  4. Add the desired second language
  Problem: Cannot hear sound from the phone on the PC (movies or games audio for example)
  Probable cause: Audio "mirroring" is not supported in this version, audio that is not phone calls audio will be sounded from the phone instead of the PC

  
  Back to Top

  (Video) HOW TO INSTALL DELL MOBILE CONNECT APP ON WINDOWS 10?

  DMC Frequently Asked Questions

  1. Question: During an Incoming call, as I'm about to enter a pre-existing text message, the incoming call no longer exists.
     Answer: There is a bug that exists in the software where the "Texting" screen will still exist even after the incoming call is terminated. This bug will be resolved in the RoW release (January 2018).
     
  2. Question: While using the camera on my phone and performing orientation, the display will appear distorted. Is there a resolution to this issue?
     Answer: Stop the beaming process and then restart beaming. This should resolve the issue.
  • Question: Is the User Interface for the Driver Installer activity available in the native language when SUT language setting of HK and Ukrainian?
    Answer:InstallShield defaults to ENGISH if the language in question is not supported. This is normal behavior.
  • Question: Why can’t I send or receive a SMS message from my computer when paired with a phone OPPO R9S?
    Answer: OPPO does not allow sending SMS messages through Bluetooth regardless of the version of Android on the phone.
  • Question: While in the system language is set to Turkish, when setting the "Do Not Disturb" feature on SUT the selection for "on" and "off" is in English instead of Turkish üzerinde and kapalı .
    Answer: This is an error in the translator software utilized by the developer. This error will be corrected in the next software release after 1.1 .
  • Question: When the system language is set to Spanish, when setting the "Do Not Disturb" is displayed for altering, the message to set is incomplete.
    Answer: While the message is incomplete, a fix has been identified and developed for resolving the issue. Solution will be implemented in the next software release.
    
  • Question: When selecting Emoji for a message, I experience one of the following errors:
    • Some Emoji’s not properly showing up
    • When you input a lot of Emoji (more than two lines) in SMS conversation screen, the edit box will not automatically follow the input cursor
    • Some Emoji of PC app cannot show normally in the SMS edit box and phone
    • Emoji cannot show normally in the detail of SMS conversion with LG phone
    • Some Emoji cannot show in the Phone but can display on the PC app
    • When you click two emoji continuously after opening the emoji pane, the emoji pane will disappear
    • Emoji lost when reopening the SMS which has been sent
    • Emoji message will show incorrect when repeat click on "national flag" button
    Answer: None of these proprietary 3rd party software errors will be corrected as Dell does not have access to the code.
  • Question: As a user, sometimes Bluetooth will loss the Device Manager after changing the OS language.
    Answer: Updating the Bluetooth driver to the latest revision will resolve the issue
  • Question: As a user, is there a solution if notifications do not appear on my PC app which originated form my phone?
    Answer: For Vivo phones, during the paring procedure the current version should pop up a Vivo hidden permission window which he user should grant permission to receive notifications. For all other phones, uninstall the app, re-install the app and then reboot the phone.
  • Question: Sometimes the third party push information to the notification center is incomplete.
    Answer: This issue has been detected with those phones that are utilizing Specific (Chinese) applications that are using a custom view for displaying notifications. This issue will be resolved in a future release.
  • Question: Sometimes my cursor / mouse will not work on the beaming window on my PC when I pair my Smart Phone t my PC with DMC.
    Answer: Certain security packages on smart phones can cause this issue. If the user will un-pair all devices, wait 3minutes and then repair, the mouse/cursor functionality should be restored.
  • Question: Sometimes the characters in my email are jumbled.
    Answer: This is a Microsoft Outlook issue with their email. Microsoft’s built in email does not decode all characters. This issue is not found with other email services. A work around can be achieve by editing the advanced settings in the Microsoft Mail client. https://answers.microsoft.com/en-us/windowslive/forum/livemail-email/windows-live-mail-mailto-protocoll-link-utf8-chars/70c99781-7f72-4c17-b678-4074576bf1f4
  • Question: The picture for the phone contact in the SMS is not displayed on the PC.
    Answer: This is normal functionality for DMC. DMC does not attempt to associate the SMS picture with a particular text or phone call.
  • Question: How do I remove the "Bluetooth HID Device" yellow bang when Dell Mobile Connect is connected to a smartphone via DMC and then connect to a second PC via Bluetooth?
    Answer: Go to the PC settings, remove the second PC Bluetooth from the SUT. Then the "Bluetooth HID device" yellow bang will disappear from Dell Mobile Connect.

  Back to Top